The T30’s Ammo Box

Aberdeen 1

The T30 heavy tank has vague information when it comes to ammunition load. Some claimed it’s only able to fire HE, some said it only has low penetrating AP round, while the others describe it as having high penetrating “M111 AP” and “M112 APCR” that can penetrate 276 mm and 320 mm of armor, respectively.

Some Problems

While some of them are true, there is so little explanation on how the T30 acquired such loadout or achieved such penetration, leading to “what if” situation where the shells are configured according to whatever related sources publicly available.

1. It only fires HE shell

The most common misconception about the T30 is that it only has HE shell. Some people claimed so due to the reason that it’s armed with a massive, but low velocity 155 mm T7 gun used for anti-fortification and destroying building, instead of dedicated anti-tank gun such as the 105 mm T5E1 mounted on the T29. Although it’s understandable since many referenced the source from R.P. Hunnicutt’s book; Firepower – A History of the American Heavy Tank.

Firepower: 155 mm T7
As you can see here, it only has a HE shell with unknown designation for the 155 mm T7.

2. It fires low penetrating AP round

Information available from certain WWII forum usually points out that the 155 mm “AP” fired from 155 mm T7 was unsatisfactory and only resulted in low anti-tank penetration performance from velocity loss. I will explain this later below.

3. “M111 AP” and “M112 APCR” that can penetrate 276 mm and 320 mm of armor

So far, it’s very popular as these rounds are available in World of Tanks, used by both T30 and T95, even goes so far that the T110E3 and T110E4 received a much improved version with E1 designation in the back that can penetrate 295 and 375 mm of armor.

These projectiles in particular are “M111” AP, and “M112” APCR. It’s interesting and confusing at the same time… The only known use of designation “M111” is a 105 mm APFSDS “Hetz” intended to penetrate the Soviet T-72. While the “M112” is actually an AP round of the 155 mm gun.

Screenshot_10

… It might be good time to explain this thoroughly.

Opening the Ammo Box

The weapon loadouts will be described as detailed as possible. But let’s start from the basics. The 155 mm T7 L/40 is a 155 mm gun of the T30 heavy tank, developed from a shortened 155 mm M1 L/45 “Long Tom”, conceived as early as 14 September 1944. It was developed alongside with the T29 heavy tank armed with 105 mm T5E1 L/65 gun.

14 Sept 1944

The T30 had up to 5 different ammunition available for use. Starting from M107 HE, M110 WP, M112B1 APBC-HE, T29E1 APCBC-HE, and finally T35E1 APCR. The specification will be listed as fired from the T7.

DYun2mA

Continue reading “The T30’s Ammo Box”

War Thunder – AMX-30 Mod. 1972

https://static.warthunder.com/upload/image/wallpapers/amx_30_1972_2560x1140_logo_com_bb6acc0b4bec1d497eec54109afaaa27.jpg

We are pleased to present the 1972 model of the AMX-30, with which truly modern French tanks begin.

Initially, the AMX-30 was developed to specifications from the armies of three countries – France, Italy and Germany, but the joint project collapsed and the AMX science and research centre undertook to finish the tank on its own. Like the engineers of other countries, the French tank designers understood that the race for maximum armour was leading nowhere – modern HEAT shells and anti-tank rockets gave tanks with traditional homogeneous armour absolutely no chance. Accordingly, the focus in development was placed on two other factors that were decisive in the field – mobility and armament. The tank’s powertrain was a 700 hp HS-110 engine, which allowed it to reach speeds comparable to those of light tanks – 65 km/h on the highway and 40 km/h off-road. Its main armament was the CN-105-F1, a 105 mm gun with fixed ammunition and a complement of 50 shells. As of 1972, instead of a high-calibre machine gun twinned with the main gun, a 20 mm cannon was installed in the turret – this very version of the tank (sometimes designated AMX-30B) we have added to the game. Although the tank’s defenses were considered secondary, it is far from deprived of armour – it has rolled and cast armour plates reaching thicknesses of 80 mm with significant clean angles.

Continue reading “War Thunder – AMX-30 Mod. 1972”

War Thunder – AMX-30 Mod. 1972

https://static.warthunder.com/upload/image/wallpapers/amx_30_1972_2560x1140_logo_com_bb6acc0b4bec1d497eec54109afaaa27.jpg

We are pleased to present the 1972 model of the AMX-30, with which truly modern French tanks begin.

Initially, the AMX-30 was developed to specifications from the armies of three countries – France, Italy and Germany, but the joint project collapsed and the AMX science and research centre undertook to finish the tank on its own. Like the engineers of other countries, the French tank designers understood that the race for maximum armour was leading nowhere – modern HEAT shells and anti-tank rockets gave tanks with traditional homogeneous armour absolutely no chance. Accordingly, the focus in development was placed on two other factors that were decisive in the field – mobility and armament. The tank’s powertrain was a 700 hp HS-110 engine, which allowed it to reach speeds comparable to those of light tanks – 65 km/h on the highway and 40 km/h off-road. Its main armament was the CN-105-F1, a 105 mm gun with fixed ammunition and a complement of 50 shells. As of 1972, instead of a high-calibre machine gun twinned with the main gun, a 20 mm cannon was installed in the turret – this very version of the tank (sometimes designated AMX-30B) we have added to the game. Although the tank’s defenses were considered secondary, it is far from deprived of armour – it has rolled and cast armour plates reaching thicknesses of 80 mm with significant clean angles.

Continue reading “War Thunder – AMX-30 Mod. 1972”